Beelink S12 Pro vs EQ14 vs UM790 for Proxmox
Beelink S12 Pro, EQ14 (the EQ12's replacement) and MINISFORUM UM790 Pro compared for Proxmox: RAM ceiling, NIC count, NVMe slots, and which one to buy.
This post contains affiliate links. If you buy through them, this site earns a small commission at no extra cost to you.
These boxes come up constantly in “which mini PC should I buy for Proxmox” threads, and almost every comparison of them is a spec table with no opinion attached. A spec table does not tell you that one of them has a RAM ceiling you will hit in month three, or that the one with the better network layout spent most of its life as a pre-order.
This page is narrower than a general roundup on purpose. If you have not picked a brand yet, start with Best Mini PCs for a Homelab in 2026 for the full field, or Beelink vs MINISFORUM for the brand-level spec comparison. Come back here when the question is specifically which of these three models to run Proxmox on, and the three Proxmox questions that decide it: how much RAM the box can ever hold, how many network ports it has, and how many drives it can mirror.
Specifications below come from the Amazon listings and Beelink’s own EQ14 product page, read in October 2026. This site researches hardware; it has not benchmarked these boxes and does not claim to.
What happened to the EQ12
People still search for the Beelink EQ12 for homelab use, and still read older reviews of it. Its Amazon listing was out of stock when checked in October 2026, so this page compares the EQ14 instead, which is the box this site recommends in that dual-2.5GbE slot.
Do not carry assumptions across from EQ12 reviews. Check the memory type and slot count on the EQ14’s own page, because those are the details that change between generations and they are the ones that decide whether the RAM you already own will fit. The EQ12 appears nowhere else in this comparison.
The three machines
| Beelink S12 Pro | Beelink EQ14 | MINISFORUM UM790 Pro | |
|---|---|---|---|
| CPU | Intel N100, 4C/4T | Intel N150, 4C/4T | Ryzen 9 7940HS, 8C/16T |
| RAM ceiling | 16GB DDR4, 1 slot | 16GB DDR4, 1 slot | 64GB DDR5, 2 slots |
| Memory channels | Single | Single | Dual |
| M.2 2280 slots | 1 (listing describes it as SATA3) | 2, PCIe 3.0 | 2, PCIe 4.0 |
| 2.5-inch bay | Yes | None listed | No |
| Network | 1x 1GbE | 2x 2.5GbE (Intel I226-V) | 1x 2.5GbE |
| iGPU | Intel UHD, 24 EU | Intel UHD, 24 EU | Radeon 780M |
| Availability | Amazon listing in stock | Amazon listing in stock (checked November 2026) | Amazon listing in stock |
Prices are deliberately absent. Mini PC and DDR5 pricing moved a lot through 2026, so check the live listing rather than trusting a number typed here months ago. Availability was read in October 2026 and changes.
The RAM ceiling is the decision, not the CPU
Almost every one of these threads argues about cores. Cores are not the constraint. Memory is.
The S12 Pro and the EQ14 each have one SO-DIMM slot with a 16GB ceiling. That is not a configuration choice you can revisit. It is the platform limit, and no amount of money fixes it later. The EQ14 is a newer, nicer box and it does not move that ceiling. In practice 16GB on a Proxmox host gets you:
- The Proxmox host itself, comfortably under 2GB
- One Docker LXC running a dozen containers, 2 to 4GB
- Two or three small VMs at 2GB each
- Not much else
That is a genuinely useful homelab, and for a lot of people it is the whole homelab forever. It is also a wall. Add a Windows VM, a Home Assistant OS VM, and anything running a database, and you are swapping.
The UM790 Pro is the only one of the three with two DDR5 SO-DIMM slots. The listing says up to 64GB, and the mini PC RAM upgrade notes cover a 96GB option with two 48GB modules that depends on your BIOS supporting them. It also runs dual channel, which matters more than the headline capacity for VM-heavy work, because every VM on the box is competing for the same memory bandwidth.
The honest framing: decide your RAM number first, then pick the box. If your plan fits inside 16GB with room to breathe, the single-slot Beelinks are the right answer and the Ryzen is money spent on headroom you will not use. If you are already unsure whether 16GB is enough, it isn’t, and that points at the UM790 Pro or at a different class of machine entirely.
Networking: where the S12 Pro loses
This is the difference that surprises people, because it is the one that never shows up in CPU benchmarks.
The S12 Pro has a single 1GbE port. On a Proxmox host, that one port carries management traffic, every VM and container’s traffic, and your backup traffic, all at once. One gigabit is roughly 110MB/s of real throughput. A nightly Proxmox backup to a NAS will saturate it, and while it is saturated, that is also the link your reverse proxy and your DNS resolver are answering on.
The EQ14 has two 2.5GbE ports. Two NICs changes what you can build:
- Dedicated management port, separate port for VM traffic
- A VLAN trunk on one NIC with the other left clean, which is the setup described in how to set up VLANs in a homelab
- A router or firewall VM with real separation between WAN and LAN sides
- Backups that do not fight your services for the same link
The UM790 Pro has one 2.5GbE port. Faster than the S12 Pro, but still a single link, so the contention problem is reduced rather than removed. Its two USB4 ports do open a 2.5GbE or 5GbE USB adapter as an option, which is a less elegant answer than a second onboard port but a real one.
One caveat worth checking on any of these: confirm which NIC controller your exact revision ships (Beelink’s page names the Intel I226-V for the EQ14), and search the Proxmox forum for that chipset before you commit, because Linux driver maturity across NIC vendors is uneven.
Storage: one slot versus two
The S12 Pro has one M.2 2280 slot plus a 2.5-inch SATA bay, and its listing describes the M.2 slot as SATA3. The EQ14 has two M.2 2280 slots, listed as PCIe 3.0, and no 2.5-inch bay is listed on Beelink’s page. The UM790 Pro has two M.2 2280 PCIe 4.0 slots and no 2.5-inch bay.
For Proxmox this is a bigger deal than it looks. Two M.2 slots means you can run a ZFS mirror for the host and VM storage, so a single drive failure does not take the hypervisor down with it. The EQ14 and the UM790 Pro can both do that. The S12 Pro cannot: one M.2 slot means your host is a single point of failure, and your mitigation is backups rather than redundancy.
The S12 Pro’s 2.5-inch bay is not a substitute. It is useful for bulk storage, a local backup target, or an ISO dump, but mirroring a boot drive to a SATA disk in a different bay is not a configuration worth building.
On which drive to put in whichever box you choose, the endurance and physical-fit traps are covered in best NVMe SSD for a mini PC homelab. The short version: check 2280 versus 2242 and single versus double sided before ordering, because a sealed mini PC is unforgiving about both.
Power and noise
No wattage figures are published here from measurement, because none were measured. What the spec sheets support: the S12 Pro’s listing gives the N100’s standard TDP as 6W, and the Ryzen 9 7940HS is a 35 to 54W configurable-TDP part. That is roughly an order of magnitude of difference in design target, and it shows up on a 24/7 machine’s electricity bill and in how hard the fan has to work. The EQ14’s N150 is in the same Intel N-series class as the N100. TDP is a design target, not a measured draw, so treat it as a direction rather than a number.
To turn that into a figure for your own situation, the calculator in homelab power usage takes your wattage and your electricity rate rather than assuming either. If silence and a low idle draw are the priority, the N-series direction is the right one, and low-power homelab under 25 watts is the deeper version of that argument.
Transcoding, if that is the actual job
If this box is going to run Jellyfin or Plex, the Intel boxes have the better-documented path. Quick Sync on the N-series UHD graphics is the most written-about hardware transcoding route in both applications, and it is why N-series mini PCs dominate that use case despite modest CPUs.
The Radeon 780M in the UM790 Pro has a capable video engine, but AMD transcoding in Jellyfin and Plex is a less well-trodden road with more edge cases.
Two things worth being clear about. Hardware transcoding does not work by default; the GPU has to be passed through to the VM or container and the app configured to use it, which is its own job after Proxmox is installed. And if transcoding is the primary reason you are buying, this is the wrong page: read best mini PC for Jellyfin or Plex for that decision, then come back for the Proxmox layer.
Which one to buy
If you can wait for it, and 16GB is enough: the EQ14. It has the same N-class CPU family and the same 16GB ceiling as the S12 Pro, plus two 2.5GbE ports and two M.2 slots, which together are the differences you will actually run into on Proxmox. The 16GB plus 500GB dual-2.5GbE configuration is listed on Amazon now (checked November 2026), after a long stretch as a pre-order on Beelink’s page. Read the listing title before you buy: a dual-1GbE version exists under the same model name, and the 2.5GbE one is the box this page recommends. Buy the RAM installed: the ceiling is 16GB either way, so there is no upgrade path to save money on later.
Buy the S12 Pro if you need a box this week, or it is meaningfully cheaper, and your plan is genuinely single-NIC and single-drive: a Docker host, some containers, a DNS resolver, nothing that needs network separation or a mirrored boot drive. It is a fine box and the 2.5-inch bay is handy. Go in knowing the 1GbE port and the single M.2 slot are the things you may regret, and check that the listing you buy is the S12 Pro by reading the title on the page.
Buy the UM790 Pro if at least one of these is true: you need more than 16GB of RAM, you want two PCIe 4.0 NVMe drives for a ZFS mirror, or you have a specific eight-core workload in mind such as a local LLM or many simultaneous VMs. If none of those is true, you are paying a large premium for headroom that will sit idle, and that money buys more homelab as storage or a second node.
Consider none of them if your budget is the binding constraint. The site’s used-box tier runs roughly $150-250 refurbished (a rough range, checked October 2026), and a used corporate micro PC often gives you more RAM and more drive bays for the money. That case is made in the used mini PC guide and ThinkCentre M720q vs M920q vs OptiPlex. The tradeoffs are size, noise, and idle power rather than capability.
Whichever box arrives, enable VT-x and VT-d (or AMD-V and AMD IOMMU) in the BIOS before you start, then follow the Proxmox mini PC setup walkthrough. The post-install checklist is the step most people skip and then wish they hadn’t.